Light Bearing (IWB)

I searched all over the internet for a holster like this, and found two, but would be 7-10 weeks. I found Huckleberry that already had holsters for other light but not the TLR-8, so I decided to reach out via FB messenger and talked with Billy. He said they did not have one and they were waiting on the molds and could be some time before they got it, then a few days later he reached back out to me and said it came in.. I decided to go with this one, but I was unsure about some things, but if it was not for the super quick assistance on every question I had I would have been unsure! Billy was awesome just as the holster is which he got to me within 3 days. Thanks again Billy!!!!

I searched all over the internet for a holster like this, and found two, but would be 7-10 weeks. I found Huckleberry that already had holsters for other light but not the TLR-8, so I decided to reach out via FB messenger and talked with Billy. He said they did not have one and they were waiting on the molds and could be some time before they got it, then a few days later he reached back out to me and said it came in.. I decided to go with this one, but I was unsure about some things, but if it was not for the super quick assistance on every question I had I would have been unsure! Billy was awesome just as the holster is which he got to me within 3 days. Thanks again Billy!!!!

Amazing quality and even more amazing service. Had a few questions and they were very quick to get back to me with an answers. And my Holster arrived 1 day early. will definitely recommend and use for future purchases. Thank You

I have ordered models for the CZ P07, equipped with APLCs and TLR7s, respectively.

HT is with you from start to finish on the order, and incredibly talented with his art. You simply won't find a better holster for WMLs.

Ride height is perfect, there's no bulky feeling, and you I can always carry with confidence.

My purchase was for a Light Bearing (IWB) for Glock G19/23 w/Streamlight TLR-8. Lets face it, carrying a G19 w/TLR-8 inside waste band is bulky compared to single stack or slimline models. That being said, I am pleasantly surprised and very happy with this holster.

I have purchased other brands. Most Kydex holsters are similar in construction but total satisfaction is in the little details. My previous purchases were "OK" but this holster is spot on for reasons outlined below and in my opinion, worth the few extra dollars. Read on to appreciate why this holster might be your best choice.

1. The buying experience, with all the option/selections, was outstanding and covered all elements. "QUICK SHIP" was exactly that.

2. This one holster will work for both my Glock G19 w/Streamlight TLR-7, Suppressor Height sights, and Red Dot optic (when I choose to mount it) as well as for my G23 w/Streamlight TLR-8 or any combination there of. (Optic Cut and tall sight channel is a nice option for those in need)

3. The FOMI clip has 3 distinct mounting options (4 screw holes). (20 degree tilt, Vertical Low, and Vertical High). I choose to run with "Side Carry" with "Vertical High" setup (2 lower screws holes). This allows me to re-holster cleanly since all top portions of the holster ride above the pant waste band to prevent fabric interference during the re-holster process.

4. On past holsters, the FOMI clip mounting screw backs were perilously close to the slide. On one, so close I felt the need to place sturdy tape over the screw back to prevent any chance of the slide making contact during "draw and re-holster". Not the case with Huckleberry holster. There is ample space between the clip screw backs and the firearm slide. Draw or re-holster at will without worry.

5. I purchased with a FULL slide sweat shield. Personal choice of course, but this FULL shield doubles as a guide during re-holstering. You can follow the point of entry back into the holster and can use the shield to help align the firearm as it gets inserted to prevent hangups from improper gun tilt forward or back.

6. I ordered with a concealment wing. Since I carry on the side, I found the wing to be less desirable. Another reviewer indicated the same and expressed a desire to remove the wing asking Huckleberry to include spacers to allow this. I found that all I had to do was remove the foot (one screw) from the wing arm. The wing arm remains but now is inconsequential during holster install. In fact, the wing arm without the foot still provides a level of pressure to help further conceal the grip. (Store the wing foot for later use.)

Hope this helps.

I wish I had listen to my friends when they told me aboit this holster, I ended up spending a lot of money trying other brands.
Hands down best appendix carry holster, I recommend adding the claw, makes a huge difference.

The holster is great as it conceals my Glock 17 gen 5 very well. I’m 6’3and 245 so my hands are very large. Therefore I carry full sized guns for the most part. The holster allows me to conceal the 17, carry comfortably and provides the proper grip when drawing the weapon.

It’s a must have....although ithe gun doesn’t have the snapping sound when inserting into the holster.

This is my 3rd holster from Huckleberry Tactical and won't be the last one I buy. Every gun I carry off duty gets a holster from this company because I know I won't have to modify it to make it work.